• Home
  • Typical Application

Marine & Offshore

Purethane's excellent resistance to sea water corrosion, impact and abrasion make it excellent for sub-sea and offshore pipelines including outfall lines as well as sea water steel pile and steel jackets. Purethane® can be applied to either steel or concrete offshore platforms, providing long lasting protection against moisture, corrosion, abrasion and severe impact.Purethane® provides excellent protection of riser piping and platform legs against erosion and abrasion at the splash zone area. It provides enduring protection to Steel and Concrete Drydocks.

 

Ships

Purethane® corrosion and abrasion resistance coatings have no equal for ships. marine2.jpgWhen used on hulls the reduction in surface resistance can result in 18 to 20% increase in speed of fuel savings of 8 to 12%. Purethane® coatings are excellent for protecting hulls of ice-breaker vessels against impact, abrasion and corrosion. They not damaged or penetrated by marine borers or barnacles and there is no damage to the coating when the barnacles are removed using mechanical scrubbers with plastic brushes or water blast.marine1.jpg In test controlled environment, Purethane® coatings were immersed in marine salt water for over five years with the same result.


Purethane® coatings are so corrosion resistant; they are outstanding for internal coating of ballast and holding tanks. They are excellent as deck coatings where there is heavy wear and need for anti-slip walk areas.Purethane® coatings can be used to re-build, repair and seal wooden hulls with complete integrity and as a totally moisture resistant sealant for wooden barge and boat decks.

Marine & Offshore
Did you Know?
The term 100% Solids is a little misleading implying a coating in solid form. Actually, it means that the coating contains no solvents or VOC’s..
More...
What's New

Purethane® Coating of three NDCT at Aravali Power’s 3X 500 MW Thermal Power plant racing towards completion.

More...